• string auto_recover — Indicates whether the service will automatically recover after a failover.
  Valid values:
  Y — The service should come out of failover automatically when IPs come back up.
  N — The service should stay in failover until a user explicitly takes the service out of failover.
• string ttl — Time To Live in seconds of records in the service. Must be less than 1/2 of the Health Probe’s monitoring interval.
  Valid values:
  30, 60, 150, 300, 450
• string notify_events — A comma separated list of what events to send notifications on.
  Valid values:
  ip – Send notifications when individual IPs change status.
  svc – Send notifications when the service state changes.
  nosrv – Send notifications when an IP labeled ‘Do Not serve’ changes status.
• string recovery_delay — The number of consecutive monitoring intervals to delay before placing an IP address back in service. Defaults to 0.
• string syslog_server — The Hostname or IP address of a server to receive syslog notifications on monitoring events.
• string syslog_port — The port that the remote syslog server is listening on. Defaults to 514.
• string syslog_ident — The ident to use when sending syslog notifications. Defaults to dynect.
• string syslog_facility — The syslog facility to use when sending syslog notifications. Defaults to daemon.
  kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, authpriv, ftp, ntp, security, console, local0, local1, local2, local3, local4, local5 ,local6, local7
• string syslog_delivery – Identifies when ‘health probe’ messages are logged through syslog.
  Valid Values:
  change – When the service’s status changes. (default)
  all – At every monitoring interval.
• string syslog_probe_fmt — The customizable string for probe notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos probe %tim: %sit %sta %rti “%msg” %adr.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string syslog_status_fmt — The customizable string for status notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos status %tim: %reg %sta %ser %rda.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string serve_count — How many records will be returned in each DNS response.
• string failover_mode — How the service should failover. Defaults to global.
  Valid values:
  ip – Failover to a particular IP.
  cname – Failover to a particular CNAME.
  global – Failover to the global IP address pool.
• string failover_data Dependent upon failover_mode.
  ip – If failover_mode is ‘ip’, this should be an IPv4 address.
  cname – If failover_mode is ‘cname’, this should be a CNAME.
  global – If failover_mode is ‘global’, this should be empty or omitted.
• array pool — Required. The IP Pool list for this service.
• string address — Required. The IP address or FQDN of the Node IP.
• string label — A descriptive string describing this IP.
• string weight — A number from 1-15 describing how often this record should be served. Higher means more.
• string serve_mode — Sets the behavior of this particular record.
  Valid values:
  always – Always serve this IP address.
  obey – Serve this address based upon its monitoring status.
  remove – Serve this address based upon its monitoring status. However, if it goes down, don’t automatically bring it back up when monitoring reports it up.
  no – Never serve this IP address.
• hash monitor — Required. The health monitor for the service.
• string protocol — Required. The protocol to monitor.
  Valid values:
  HTTP HTTPS PING SMTP TCP
• string interval — Required. How often to run the monitor.
  Valid values:
  1 – Every minute
  5 – Every 5 minutes
  10 – Every 10 minutes
  15 – Every 15 minutes
• string retries — How many retries the monitor should attempt on failure before giving up.
• string timeout — How much time (in seconds) before the connection attempt times out.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate port to connect to.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a ‘down’ status./li>
• string contact_nickname — Required. Name of contact to receive notifications.

• string active — Indicates whether or not the service is active.
  Valid values:
  Y — The service is active.
  N — The service is inactive.
• string status The current state of the service.
  Valid states:
  unk – The service state is not yet known.
  ok – There are no problems with the service.
  trouble – One or more node_ips are reporting down.
  failover – The number of okay node_ips has fallen below failover_count. The service has failed over.
• string auto_recover — Indicates whether the service will automatically recover after a failover.
  Valid values:
  Y — The service should come out of failover automatically when IPs come back up.
  N — The service should stay in failover until a user explicitly takes the service out of failover.
• string ttl — Time To Live in seconds of records in the service. Must be less than 1/2 of the Health Probe’s monitoring interval.
  Valid values:
  30, 60, 150, 300, 450
• string notify_events — A comma separated list of what events to send notifications on.
  Valid values:
  ip – Send notifications when individual IPs change status.
  svc – Send notifications when the service state changes.
  nosrv – Send notifications when an IP labeled ‘Do Not serve’ changes status.
• string recovery_delay — The number of consecutive monitoring intervals to delay before placing an IP address back in service. Defaults to 0.
• string syslog_server — The Hostname or IP address of a server to receive syslog notifications on monitoring events.
• string syslog_port — The port that the remote syslog server is listening on. Defaults to 514.
• string syslog_ident — The ident to use when sending syslog notifications. Defaults to dynect.
• string syslog_facility — The syslog facility to use when sending syslog notifications. Defaults to daemon.
  kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, authpriv, ftp, ntp, security, console, local0, local1, local2, local3, local4, local5 ,local6, local7
• string syslog_delivery – Identifies when ‘health probe’ messages are logged through syslog.
  Valid Values:
  change – When the service’s status changes. (default)
  all – At every monitoring interval.
• string syslog_probe_fmt — The customizable string for probe notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos probe %tim: %sit %sta %rti “%msg” %adr.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string syslog_status_fmt — The customizable string for status notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos status %tim: %reg %sta %ser %rda.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string serve_count — How many records will be returned in each DNS response
• string failover_mode — How the service should failover. Defaults to global.
  Valid values:
  ip – Failover to a particular IP
  cname – Failover to a particular CNAME
  global – Failover to the global IP address pool
• string failover_data Dependent upon failover_mode.
  ip – If failover_mode is ‘ip’, this should be an IPv4 address.
  cname – If failover_mode is ‘cname’, this should be a CNAME.
  global – If failover_mode is ‘global’, this should be empty or omitted.
• array pool — The IP Pool list for this service.
• string address — The IP address or FQDN of the Node IP.
• string label — A descriptive string describing this IP.
• string weight — A number from 1-15 describing how often this record should be served. Higher means more.
• string serve_mode — Sets the behavior of this particular record.
  Valid values:
  always – Always serve this IP address.
  obey – Serve this address based upon its monitoring status.
  remove – Serve this address based upon its monitoring status. However, if it goes down, don’t automatically bring it back up when monitoring reports it up.
  no – Never serve this IP address.
• string status — The current state of the Node IP.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• array log — Recent monitoring logs for this IP.
• string status — The state of the Node IP at the time of the log entry.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• string message — If status is ‘down’, an error message explaining the failure.
• string time — The time or probe interval when this log entry was generated.
• string site_code — The airport code of the monitoring site that generated this log entry.

• string protocol — The protocol to monitor.
  Valid values:
  HTTP HTTPS PING SMTP TCP
• string interval — How often to run the monitor.
  Valid values:
  1 – Every minute
  5 – Every 5 minutes
  10 – Every 10 minutes
  15 – Every 15 minutes
• string retries — How many retries the monitor should attempt on failure before giving up.
• string timeout — How much time (in seconds) before the connection attempt times out.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate port to connect to.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a ‘down’ status.

• string auto_recover — Indicates whether the service will automatically recover after a failover.
  Valid values:
  Y — The service should come out of failover automatically when IPs come back up.
  N — The service should stay in failover until a user explicitly takes the service out of failover.
• string ttl — Time To Live in seconds of records in the service. Must be less than 1/2 of the Health Probe’s monitoring interval.
  Valid values:
  30, 60, 150, 300, 450
• string notify_events — A comma separated list of what events to send notifications on.
  Valid values:
  ip – Send notifications when individual IPs change status.
  svc – Send notifications when the service state changes.
  nosrv – Send notifications when an IP labeled ‘Do Not serve’ changes status.
• string recovery_delay — The number of consecutive monitoring intervals to delay before placing an IP address back in service. Defaults to 0.
• string syslog_server — The Hostname or IP address of a server to receive syslog notifications on monitoring events.
• string syslog_port — The port that the remote syslog server is listening on. Defaults to 514.
• string syslog_ident — The ident to use when sending syslog notifications. Defaults to dynect.
• string syslog_facility — The syslog facility to use when sending syslog notifications. Defaults to daemon.
  kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, authpriv, ftp, ntp, security, console, local0, local1, local2, local3, local4, local5 ,local6, local7
• string syslog_delivery – Identifies when ‘health probe’ messages are logged through syslog.
  Valid Values:
  change – When the service’s status changes. (default)
  all – At every monitoring interval.
• string syslog_probe_fmt — The customizable string for probe notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos probe %tim: %sit %sta %rti “%msg” %adr.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string syslog_status_fmt — The customizable string for status notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos status %tim: %reg %sta %ser %rda.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string serve_count — How many records will be returned in each DNS response.
• string failover_mode — How the service should failover. Defaults to global.
  Valid values:
  ip – Failover to a particular IP.
  cname – Failover to a particular CNAME.
  global – Failover to the global IP address pool.
• string failover_data Dependent upon failover_mode.
  ip – If failover_mode is ‘ip’, this should be an IPv4 address.
  cname – If failover_mode is ‘cname’, this should be a CNAME.
  global – If failover_mode is ‘global’, this should be empty or omitted.
• array pool — Required. The IP Pool list for this service.
• string address — Required. The IP address or FQDN of the Node IP.
• string label — A descriptive string describing this IP.
• string weight — A number from 1-15 describing how often this record should be served. Higher means more.
• string serve_mode — Sets the behavior of this particular record.
  Valid values:
  always – Always serve this IP address.
  obey – Serve this address based upon its monitoring status.
  remove – Serve this address based upon its monitoring status. However, if it goes down, don’t automatically bring it back up when monitoring reports it up.
  no – Never serve this IP address.
• hash monitor — Required. The health monitor for the service.
• string protocol — Required. The protocol to monitor.
  Valid values:
  HTTP HTTPS PING SMTP TCP
• string interval — Required. How often to run the monitor.
  Valid values:
  1 – Every minute
  5 – Every 5 minutes
  10 – Every 10 minutes
  15 – Every 15 minutes
• string retries — How many retries the monitor should attempt on failure before giving up.
• string timeout — How much time (in seconds) before the connection attempt times out.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate port to connect to.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a ‘down’ status.
• string contact_nickname — Required. Name of contact to receive notifications.
• string fqdn — Required. Name of node where the service exists.
• string token — Required. The session identifier.
• string zone — Required. Name of the zone where the service exists.

• string active — Indicates whether or not the service is active.
  Valid values:
  Y — The service is active.
  N — The service is inactive.
• string status The current state of the service.
  Valid states:
  unk – The service state is not yet known.
  ok – There are no problems with the service.
  trouble – One or more node_ips are reporting down.
  failover – The number of okay node_ips has fallen below failover_count. The service has failed over.
• string auto_recover — Indicates whether the service will automatically recover after a failover.
  Valid values:
  Y — The service should come out of failover automatically when IPs come back up.
  N — The service should stay in failover until a user explicitly takes the service out of failover.
• string ttl — Time To Live in seconds of records in the service. Must be less than 1/2 of the Health Probe’s monitoring interval.
  Valid values:
  30, 60, 150, 300, 450
• string notify_events — A comma separated list of what events to send notifications on.
  Valid values:
  ip – Send notifications when individual IPs change status.
  svc – Send notifications when the service state changes.
  nosrv – Send notifications when an IP labeled ‘Do Not serve’ changes status.
• string recovery_delay — The number of consecutive monitoring intervals to delay before placing an IP address back in service. Defaults to 0.
• string syslog_server — The Hostname or IP address of a server to receive syslog notifications on monitoring events.
• string syslog_port — The port that the remote syslog server is listening on. Defaults to 514
• string syslog_ident — The ident to use when sending syslog notifications. Defaults to dynect.
• string syslog_facility — The syslog facility to use when sending syslog notifications. Defaults to daemon.
  kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, authpriv, ftp, ntp, security, console, local0, local1, local2, local3, local4, local5 ,local6, local7
• string syslog_delivery – Identifies when ‘health probe’ messages are logged through syslog.
  Valid Values:
  change – When the service’s status changes. (default)
  all – At every monitoring interval.
• string syslog_probe_fmt — The customizable string for probe notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos probe %tim: %sit %sta %rti “%msg” %adr.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string syslog_status_fmt — The customizable string for status notifications’ syslog message format. The messages will replace the %xxx variables with the data required. Default: %hos status %tim: %reg %sta %ser %rda.
  Valid values:
  %hos – hostname
  %tim – current timestamp or monitored interval
  %reg – region code
  %sta – status
  %ser – record serial
  %rda – rdata
  %sit – monitoring site
  %rti – response time
  %msg – message from monitoring
  %adr – address of monitored node
  %med – median value
• string serve_count — How many records will be returned in each DNS response.
• string failover_mode — How the service should failover. Defaults to ‘global’.
  Valid values:
  ip – Failover to a particular IP.
  cname – Failover to a particular CNAME.
  global – Failover to the global IP address pool.
• string failover_data Dependent upon failover_mode.
  ip – If failover_mode is ‘ip’, this should be an IPv4 address.
  cname – If failover_mode is ‘cname’, this should be a CNAME.
  global – If failover_mode is ‘global’, this should be empty or omitted.
• array pool — The IP Pool list for this service.
• string address — The IP address or FQDN of the Node IP.
• string label — A descriptive string describing this IP.
• string weight — A number from 1-15 describing how often this record should be served. Higher means more.
• string serve_mode — Sets the behavior of this particular record.
  Valid values:
  always – Always serve this IP address.
  obey – Serve this address based upon its monitoring status.
  remove – Serve this address based upon its monitoring status. However, if it goes down, don’t automatically bring it back up when monitoring reports it up.
  no – Never serve this IP address.
• string status — The current state of the Node IP.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• array log — Recent monitoring logs for this IP.
• string status — The state of the Node IP at the time of the log entry.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• string message — If status is ‘down’, an error message explaining the failure.
• string time — The time or probe interval when this log entry was generated.
• string site_code — The airport code of the monitoring site that generated this log entry.
• hash monitor — The health monitor for the service.
• string protocol — The protocol to monitor.
  Valid values:
  HTTP HTTPS PING SMTP TCP
• string interval — How often to run the monitor.
  Valid values:
  1 – Every minute
  5 – Every 5 minutes
  10 – Every 10 minutes
  15 – Every 15 minutes
• string retries — How many retries the monitor should attempt on failure before giving up.
• string timeout — How much time (in seconds) before the connection attempt times out.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate port to connect to.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n)
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a ‘down’ status.
• string contact_nickname — Name of contact to receive notifications.
• string fqdn — Fully qualified domain name of a node in the zone.
• string zone — Name of the zone.

{
	'zone' => 'example.com',
	'fqdn' => 'somehost.example.com',
	'token' => 'asdlj34ot879834cdzjklfK',
	'contact_nickname' => 'owner',
	'auto_recover' => 'Y',
	'ttl' => 60,
	'notify_events' => 'ip,svc',
	'failover_mode' => 'ip',
	'failover_data' => '127.0.0.1',
	'serve_count' => 1,
	'pool' => [
		{
			'address' => '1.2.3.4',
			'serve_mode' => 'obey',
		},
		{
			'address' => '5.6.7.8',
			'serve_mode' => 'obey',
		},
	],
	'monitor' => {
		'protocol' => 'HTTP',
		'interval' => 1,
	},
}