• string active — Indicates whether the service is active.
  Valid values:
  Y = The service is active.
  N = The service is inactive.
• string status — The current state of the service.
  Valid values:
  unk – The service state is not yet known.
  ok – There are no problems with the service.
  trouble – One or more node_ips are reporting down.
  failover – The number of okay node_ips has fallen below failover_count. The service has failed over.
• string auto_recover —
  Y if the service should come out of failover automatically when IPs come back up.
  N if the service should stay in failover until a user explicitly takes the service out of failover.
• string ttl Time To Live in seconds of records in the service. Must be less than 1/2 of the Health Probe’s monitoring interval.
  Valid values:
  30, 60, 150, 300, 450
• string notify_events — A comma separated list of which events will trigger notifications.
  Valid values:
  ip – Send notifications when individual IPs change status.
  svc – Send notifications when the service state changes.
  nosrv – Send notifications when an IP labeled ‘Do Not serve’ changes status.

NOTE: SYSLOG Notifications will come from one or both of these IP Addresses: 216.146.40.70 — or — 216.146.41.70

• string recovery_delay — The number of consecutive monitoring intervals to delay before placing an IP address back in service. Defaults to 0.
• string syslog_server — The Hostname or IP address of a server to receive syslog notifications on monitoring events.
• string syslog_port — The port that the remote syslog server is listening on. Defaults to 514.
• string syslog_ident — The ident to use when sending syslog notifications. Defaults to dynect.
• string syslog_facility — The syslog facility to use when sending syslog notifications. Defaults to daemon.
  Valid Values: kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, authpriv, ftp, ntp, security, console, local0, local1, local2, local3, local4, local5, local6, local7
• array region — A list of regions.
• string autopopulate — If set to ‘Y’, this region will automatically be filled in from the global pool, and any other options passed in for this region will be ignored.
• string ep — Eligibility Pool – How many records will make it into the eligibility pool. The addresses that get chosen will be those that respond the fastest.
• string serve_count — How many records will be returned in each DNS response.
• string failover_mode — How the region should failover. Defaults to global.
  Valid values:
  ip – Failover to a particular IP.
  cname – Failover to a particular CNAME.
  region – Failover to a particular region.
  global – Failover to the global IP address pool.
• string failover_data Dependent upon failover_mode.
  ip – If failover_mode is ‘ip’, this should be an IP address.
  cname – If failover_mode is ‘cname’, this should be a CNAME.
  region – If failover_mode is ‘region’, this is the region_code for the failover target region.
  global – If failover_mode is ‘global’, this is empty or omitted.
• string apmc — The minimum amount of IPs that must be in the up state, otherwise the region will be in failover.
• string epmc — The minimum amount of IPs that must be populated in the Eligibility Pool (EP), otherwise the region will be in failover.
• string region_code — Name of the region.
  Valid values: US West, US Central, US East, EU West, EU Central, EU East, Asia, global
• array pool — The IP Pool list for this region.
• string address — The IP address or FQDN of this Node IP.
• string label — A descriptive string describing this IP.
• string weight — A number from 1-15 describing how often this record should be served. Higher means more.
• string serve_mode — Sets the behavior of this particular record.
  Valid values:
  always – Always serve this IP address.
  obey – Serve this address based upon its monitoring status.
  remove – Serve this address based upon its monitoring status. However, if it goes down, don’t automatically bring it back up when monitoring reports it up.
  no – Never serve this IP address.
• string status — The current state of the Node IP.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• array log — Recent monitoring logs for this IP.
• string status — The state of the Node IP at the time of the log entry.
  Valid Values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• string message If status is down, an error message explaining the failure.
• string time The time or probe interval when this log entry was generated.
• string site_code — The airport code of the monitoring site that generated this log entry.
• string status — The current state of the region.
  Valid values:
  unk – The service state is not yet known.
  ok – There are no problems with the service.
  trouble – One or more node_ips are reporting down.
  failover – The number of okay node_ips has fallen below failover_count. The service has failed over.
• hash monitor — The health monitor for the service.
• string protocol — The protocol to monitor.
  Valid values: NONE, HTTP, HTTPS, PING, STMP, TCP
• string interval — How often to run the monitor.
  Valid values:
  1 – Every minute
  5 – Every 5 minutes
  10 – Every 10 minutes
  15 – Every 15 minutes
• string retries — How many retries the monitor should attempt on failure before giving up.
• string timeout — How much time (in seconds) before the connection attempt times out.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate connection port.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a down status.
• hash performance_monitor — The performance monitor for the service.
• string protocol — The protocol to monitor.
  Valid values: HTTP, HTTPS, PING, SMTP, TCP
• string interval — How often to run the monitor.
  Valid values:
  10 – Every 10 minutes
  20 – Every 20 minutes
  30 – Every half-hour
  60 – Every hour
• string retries — How many retries the monitor should attempt on failure before giving up.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate connection port.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a down status.
• integer timeout — A time, in seconds. If a probes takes longer than this to complete, it is considered a failure. Defaults to 10 seconds.
  Valid values: 10, 15, 25, 30
• string contact_nickname — Name of contact to receive notifications.
• string fqdn — Fully qualified domain name of a node in the zone.
• string zone — Name of the zone.

• hash data
• string active — Indicates whether the service is active.
  Valid values:
  Y — The service is active.
  N — The service is inactive.
• string status — The current state of the service.
  Valid values:
  unk – The service state is not yet know.
  nok – There are no problems with the service.
  trouble – One or more node_ips are reporting down.
  failover – The number of okay node_ips has fallen below failover_count. The service has failed over.
• string auto_recover — Y if the service should come out of failover automatically when IPs come back up, N if the service should stay in failover until a user explicitly takes the service out of failover.
• string ttl — Time To Live in seconds of records in the service. Must be less than 1/2 of the Health Probe’s monitoring interval.
  Valid values: 30, 60, 150, 300, 450
• string notify_events — A comma separated list of which events trigger notifications.
  Valid values:
  ip – Send notifications when individual IPs change status.
  svc – Send notifications when the service state changes.
  nosrv – Send notifications when an IP labeled ‘Do Not serve’ changes status.

NOTE: SYSLOG Notifications will come from one or both of these IP Addresses: 216.146.40.70 — or — 216.146.41.70

• string recovery_delay — The number of consecutive monitoring intervals to delay before placing an IP address back in service. Defaults to 0.
• string syslog_server — The Hostname or IP address of a server to receive syslog notifications on monitoring events.
• string syslog_port — The port that the remote syslog server is listening on. Defaults to 514.
• string syslog_ident — The ident to use when sending syslog notifications. Defaults to dynect.
• string syslog_facility — The syslog facility to use when sending syslog notifications. Defaults to daemon.
  Valid values: kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, authpriv, ftp, ntp, security, console, local0, local1, local2, local3, local4, local5, local6, local7
• array region — A list of regions.
• string autopopulate — If set to Y, this region will automatically be filled in from the global pool, and any other options passed in for this region will be ignored.
• string ep — Eligibility Pool – How many records will make it into the eligibility pool. The addresses that get chosen will be those that respond the fastest.
• string serve_count — How many records will be returned in each DNS response.
• string failover_mode — How the region should failover. Defaults to global.
  Valid values:
  ip – Failover to a particular IP.
  cname – Failover to a particular CNAME.
  region – Failover to a particular region.
  global – Failover to the global IP address pool.
• string failover_data — Dependent upon failover_mode.
  Valid Values:
  ip – If failover_mode is ‘ip’, this should be an IP address.
  cname – If failover_mode is ‘cname’, this should be a CNAME.
  region – If failover_mode is ‘region’, this is the region_code for the failover target region.
  global – If failover_mode is ‘global’, this is empty or omitted.
• string apmc — The minimum amount of IPs that must be in the up state, otherwise the region will be in failover.
• string epmc — The minimum amount of IPs that must be populated in the Eligibility Pool (EP), otherwise the region will be in failover.
• string region_code — Name of the region.
  Valid values: US West, US Central, US East, EU West, EU Central, EU East, Asia, global
• array pool — The IP Pool list for this region.
• string address — The IP address or FQDN of this Node IP.
• string label — A descriptive string describing this IP.
• string weight — A number from 1-15 describing how often this record should be served. Higher means more.
• string serve_mode — Sets the behavior of this particular record.
  Valid values:
  always – Always serve this IP address.
  obey – Serve this address based upon its monitoring status.
  remove – Serve this address based upon its monitoring status. However, if it goes down, don’t automatically bring it back up when monitoring reports it up.
  no – Never serve this IP address.
• string status — The current state of the Node IP.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• array log — Recent monitoring logs for this IP.
• string status — The state of the Node IP at the time of the log entry.
  Valid values:
  unk – The state of the IP address is not yet known.
  up – The IP address is up.
  down – The IP address is down.
• string message — If status is ‘down’, an error message explaining the failure.
• string time — The time or probe interval when this log entry was generated.
• string site_code — The airport code of the monitoring site that generated this log entry.
• string status — The current state of the region.
  Valid states:
  unk – The service state is not yet known.
  ok – There are no problems with the service.
  trouble – One or more node_ips are reporting down.
  failover – The number of okay node_ips has fallen below failover_count. The service has failed over.
• hash monitor — The health monitor for the service.
• string protocol — The protocol to monitor.
  Valid values: NONE, HTTP, HTTPSm PING, STMP, TCP
• string interval — How often to run the monitor.
  Valid values:
  1 – Every minute
  5 – Every 5 minutes
  10 – Every 10 minutes
  15 – Every 15 minutes
• string retries — How many retries the monitor should attempt on failure before giving up.
• string timeout — How much time (in seconds) before the connection attempt times out.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate connection port.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a down status.
• hash performance_monitor — The performance monitor for the service.
• string protocol — The protocol to monitor.
  Valid values:HTTP, HTTPS, PING, SMTP, TCP
• string interval — How often to run the monitor.
  Valid values:
  10 – Every 10 minutes
  20 – Every 20 minutes
  30 – Every half-hour
  60 – Every hour
• string retries — How many retries the monitor should attempt on failure before giving up.
• string port — For HTTP(S)/SMTP/TCP probes, an alternate port to connect to.
• string path — For HTTP(S) probes, a specific path to request.
• string host — For HTTP(S) probes, a value to pass in to the Host: header.
• string header — For HTTP(S) probes, additional header fields/values to pass in, separated by the newline character (\n).
• string expected — For HTTP(S) probes, a string to search for in the response. For SMTP probes, a string to compare the banner against. Failure to find this string means the monitor will report a down status.
• integer timeout — A time, in seconds. If a probes takes longer than this to complete, it is considered a failure. Defaults to 10 seconds.
  Valid values: 10, 15, 25, 30
• string contact_nickname — Name of contact to receive notifications.
• string fqdn — Fully qualified domain name of a node in the zone.
• string zone — Name of the zone.

{
	'zone' => 'example.com',
	'fqdn' => 'somehost.example.com',
	'token' => 'asdlj34ot879834cdzjklfK',
}

{
	'zone' => 'example.com',
	'fqdn' => 'somehost.example.com',
	'token' => 'asdlj34ot879834cdzjklfK',
	'address' => '1.2.3.4',
}